Re: farmall c steering shaft universal jionts

Posted by Farmer Bob on January 02, 2002 at 20:54:20 from (66.152.73.116):

In Reply to: farmall c steering shaft universal jionts posted by jimmy on January 02, 2002 at 16:11:18:

Jimmy, As Haas expained, the spiders (Universals) are replaceable. remove the snap ring and tap out the spider heads, needle bearing will go all over so have the replacement from your local Case/IH dealer handy to install the new one(s). I found it worked well to use a large "C" clamp to squeeze the new caps onto the spider. Make sure you get the caps started squarely with the spider so you don't damage the needle bearings in the new caps.//FB

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: farmall c steering shaft universal jionts Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]