Re: Standard Oil Pressure for M

Posted by Steven@nd on January 01, 2002 at 15:38:45 from (12.15.56.164):

In Reply to: Standard Oil Pressure for M posted by John on January 01, 2002 at 14:32:42:

Had an M, ran 70 psi all the time according to the gauge. My Super MTA also runs 70 psi, HOT! The only time it comes down is when the engine is hot and idling slow.

Spec in my I&T shop manual is 60-70 psi - that's where the relief valve is to be set at least.

Steven

PS - I've seen these tractors run many many hours with the oil pressure gauge barely coming off the bottom of the gauge at idle and less than 1/2 at full throttle.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Standard Oil Pressure for M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]