230 tranny, how to get the shaft out?

Posted by Drizler on December 31, 2001 at 19:18:26 from (12.23.26.27):

I need to change 3rd gear in my 230. I pulled the pulley and pto unit. The trans shaft seems to have 1st gear pinned on it. If I grind off the pin and punch it will the whole shaft slide out through the rear bearing so I can get 3 off.
My other problem is a broken axle. I doubt the thing will push out as it twisted off just inside the inner bearing. Do I have to separate the axle outer casing from the tranny like it seems I will have to or is there another way?,

Follow Ups:

• Re: 230 tranny, how to get the shaft out? the tractor vet 19:33:31 12/31/01 (2)
  • Re: Re: 230 tranny, how to get the shaft out? Drizler 20:23:13 12/31/01 (1)
    • Re: Re: Re: 230 tranny, how to get the shaft out? J.D. Humm 11:10:02 01/01/02 (0)

Post A Followup Name: E-Mail: Subject: Re: 230 tranny, how to get the shaft out? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]