Re: Re: Paint Guns - Recommendations?

Posted by Cliff Neubauer on December 26, 2001 at 17:56:32 from (208.145.207.60):

In Reply to: Re: Paint Guns - Recommendations? posted by Keith on December 26, 2001 at 17:44:10:

To get good results using the newer high solids urethane paints you do need to spend some $ to get a good HVLP gun. For a conventional gun you can get by with $50 because it is old technology but the "good" HVLP guns have only been around the last few years so they are pricey. I started out with a $80 gun from Wal-mart but I now have a Sharpe Platinum ($350) and I would not want to go back. As expensive as the urethane paints are the HVLP guns will quickly pay for themselves by getting twice as much paint onto the surface compared to a conventional gun.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Paint Guns - Recommendations? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]