Re: Re: Bumper for a IH 140

Posted by Hugh MacKay on December 18, 2001 at 01:35:05 from (142.177.108.201):

In Reply to: Re: Bumper for a IH 140 posted by Glenn(WV) on December 17, 2001 at 19:33:59:

The problem as I see it, if want to keep tractor so you can use center mount cultivator and most do. You could fasten the bottom by going under axel and fasten to the casting for mounting cult at back of steering box. to brace the top you have to go to the clutch housing to make it solid. Just my thoughts, I however have center mount cult and some attachments I have fabricated which mount to just about every solid hole on front of tractor, ie gandy aplicator, side dresser etc.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Bumper for a IH 140 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]