|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Front Wheel Assist
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Denny Frisk on December 03, 2001 at 07:13:30 from (12.4.181.2):
In Reply to: Re: Re: Re: Re: Front Wheel Assist posted by john2510-3020 on December 02, 2001 at 17:37:44:
IH made their own axle for the 5X88 series. The Elwood axle carried over to the 3X88 series as the rearend was basically the same as the 86 series was. Elwood had several different mounting methods thru the time I dealt with them at FARMALL. The later axles pinned right on like the OEM front axle. No extra mounting brackets to bolt on the front bolster. Sure wish I still had the picture of the Hydro 186 FWA Hi-Clear Elwood made for IHC Hinsdale! Talk about RARE! It was disassembled befroe it left ELWOOD's shop! to go back to Hinsdale.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
