|
Farmall & IHC Tractors Discussion Board |
Re: 300u steering box-message for Big Fred
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by big fred on November 13, 2001 at 12:36:51 from (12.13.226.15):
In Reply to: 300u steering box-message for Big Fred posted by 300 Randy on November 13, 2001 at 10:34:01:
e-mail is johnsonf@tx3.net . I have my 300U in the garage now. I'm going to be taking the power steering off it over Thanksgiving. I know I have at least two of the bolts holding the gearbox to the frame that are busted, and I have no oil seals at the output shafts, so I can't keep oil in it. It also looks like the output shaft bushings are worn. I'm also in need of new drag links, as mine are all beat up and one of them is the wrong length. That in turn screws up my steering geometry. I think I'll be a couple months working on this steering. Looking forward to hearing your progress.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
