Re: Re: 300 with broken rear axle

Posted by Denny Frisk on October 31, 2001 at 13:39:13 from (12.4.181.2):

In Reply to: Re: 300 with broken rear axle posted by Tim Shaw on October 29, 2001 at 19:38:36:

Your right, and the heavy-duty axle used the same size axle and wheel hub as the M. The clue would be to check the part number of the bullgear to see if it advanced to a 6-digit part number that ended in "R1" or R-91". If it was still the old 4-digit ending in D or DA or DAX or whatever then the H axle would work. I think the bullgears were the same for either size axle on the 300's.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: 300 with broken rear axle Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]