Re: Farmall A snowplow

Posted by scotty on October 19, 2001 at 09:40:45 from (199.231.49.128):

In Reply to: Farmall A snowplow posted by scotty on October 19, 2001 at 08:09:32:

Thanks Guys,
The frame between the rear housing is 1 1/2x 3"
rectangular tubing welded to 2x7" plates 1/2"thk.
Two 5/8" bolts on each side 5" centers.The main
frame quick disconnects from the rear frame with
two 1/2" stainless pins and hitch pins.Main frame
bolts to front of tractor on steering box.Made
1 1/2" sq bar to go through sq hole in box.Used
two 5/8" bolts.Main frame is 1 1/2" rect tubing
3/16" wall.Pivot takes place under steering box.
I made my own pulleys at work,toolmaker by trade,but could by pulleys from hardware store.
thanks again
scotty

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall A snowplow Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]