Re: Splittin my Super C - How do I support the front?

Posted by Gary on October 12, 2001 at 19:38:19 from (64.12.101.164):

In Reply to: Splittin my Super C - How do I support the front? posted by J3nut on October 12, 2001 at 19:28:59:

I assume yours is a narrow front end tractor. I took 2 short 2 x 8s or 10s and bolted them to the cultivator mounting places on the sides of the rear of the engine.It worked just like legs. I used thin strips of wood as shims to get them close and then let a little air out of the front tires to get it on the ground. Make sure you use at least 2 bolts in each one so they can't turn on you.

Follow Ups:

• Re: Re: Splittin my Super C - How do I support the front? Sounds good 06:48:31 10/13/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Splittin my Super C - How do I support the front? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]