farmall 300

Posted by TomT on October 10, 2001 at 12:57:38 from (198.5.155.132):

I have a 300 that has no 3 pt. but does have 3 hydraulic remotes. I hate to see the old thing sit and thought it would make a good tractor to pull a v-rake and tetter with. My problem is that the remote pipes going out the rear have rusted into. It appears that these were formed into the control unit somehow. I don't even know if the pump will work and was looking for a cheap way to test.The tractor and pull type bush-hog were given to me by a friend. It was running at one time but has been sitting under my barn for a couple years now since the cows ate the wires off of it. Needs new alternator also but that will be another project. I just need to confirm that hydraulics will work and will lift v-rake to transport position. I need to justify reason for spending money on an old gas burner before I proceed.

Follow Ups:

• Re: farmall 300 jmyt_47 13:38:15 10/10/01 (0)

Post A Followup Name: E-Mail: Subject: Re: farmall 300 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]