Re: Farmall M Front Oil Seal

Posted by Bob M on October 07, 2001 at 18:14:02 from (66.66.72.246):

In Reply to: Farmall M Front Oil Seal posted by Bud on October 07, 2001 at 17:26:11:

Hey Bud - Dale's right - the seal's pressed into the front (timing gear) cover. To get at it you'll need to disconnect the steering shaft, drain the radiator then remove the entire front bolster and radiator assembly as a unit (not difficult but you'll need a hoist because it's HEAVY!). You'll need a 2-1/2" socket to unscrew the crank pulley nut - then remove the crank pulley. Finally unbolt the timing cover to get at the seal. However with the crank pulley removed you may be able to remove/replace the seal without taking off the timing cover.

Hope this helps...

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall M Front Oil Seal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]