Re: Farmall 200 Generator Problems

Posted by Haas on October 06, 2001 at 06:04:07 from (129.37.117.128):

In Reply to: Farmall 200 Generator Problems posted by Pappy on October 06, 2001 at 05:12:26:

Maybe the generator is bad. It should require no conversion to use the regulator. Only three wires are required. One from the F terminal on the regulator to the F terminal on the generator. One from the Gen terminal on the generator to the Gen terminal on the regulator. And one from the Bat terminal on the regulator to the battery, usually though the ammeter on the way to the battery. You do not need to hook anything to the L terminal on the regulator. L stands for load, or lights and is the same as hooking to a wire from the battery. Be sure your regulator has a good ground. You may need to run a wire from the mounting lug to a good ground. Also use No. 12 or larger wire for the wire from the gen to gen terminal on the regulator and for the wire from the Bat terminal to the Battery.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 200 Generator Problems Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]