Hydraulic pump leaks on Super A

Posted by marvin on October 05, 2001 at 11:18:59 from (134.134.248.28):

Having read a number of messages on this board about hydraulic fluid leaking into the crankcase on Super A's and having my hydraulic fluid level going lower, I decided I needed to replace the seals in the pump. My manual suggests that there is a seal kit from IH. My dealer could not find a kit and needed to know if it was a Presco or Thompson pump. Have the rest of you purchased a kit or did you have to purchase individual seals to rebuild?
What precautions should I take in rebuilding the pump?
What about the touch control unit? I have some leaks there and would like to take care of those. Is it jsut disassemble, clean, replace seals and re torque everthing?

Follow Ups:

• Re: Hydraulic pump leaks on Super A gene b 20:07:54 10/05/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Hydraulic pump leaks on Super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]