Super C sleeve

Posted by Moose on September 27, 2001 at 20:14:27 from (12.91.127.128):

Replaced a pitted cylinder sleeve on a Super "C" with a used sleeve I mail ordered. Before the final "buckle back up", I filled the radiator. Water poured out the bottom of the sleeve where the sleeve should have seated into the lower engine block. I now see that there is a huge gap all around the replaced sleeve. Obviously, this sleeve does not go into my block, even though it is the proper bore and proper top dimensions. Anyone know what the deal here is? Did the Super have several different sleeve outside lower diameters?

Follow Ups:

• Re: Super C sleeve potosi 19:13:25 09/29/01 (0)
• Re: Super C sleeve gene b 22:09:09 09/27/01 (0)
• Re: Super C sleeve Moose 20:45:07 09/27/01 (3)
  • Re: Re: Super C sleeve justin 20:49:42 09/27/01 (2)
    • Re: Re: Re: Super C sleeve Moose 20:59:38 09/27/01 (1)
      • Re: Re: Re: Re: Super C sleeve justin 22:16:47 09/27/01 (0)
• Re: Super C sleeve justin 20:29:37 09/27/01 (0)
• Re: Super C sleeve justin 20:29:32 09/27/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Super C sleeve Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]