Re: Char-Lynne Lift for Super A

Posted by Haas on September 23, 2001 at 12:13:26 from (129.37.117.28):

In Reply to: Char-Lynne Lift for Super A posted by Brian on September 23, 2001 at 10:50:25:

This happens because you only get back pressure on the system when the touch control is operating. The rest of the time, it is just bypassing back to the reservoir. To get the system to work like you want, you will have to cut the pressure line that goes from the pump to the touch control unit. Then tie the pump line into your open center valve for the loader and then pipe the return line from the open center valve back into the line that you cut going to the touch control. With these modifications, the touch control and the loader should both work, although not at the same time. IH made a remote valve for tractors with the touch control, but this valve included a different manifold for the lines from the pump to the touch control, along with the remote valve. The manifold for the remote does essentially what I described above.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Char-Lynne Lift for Super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]