Re: PTO on Super-C

Posted by Haas on September 04, 2001 at 17:16:20 from (129.37.117.62):

In Reply to: PTO on Super-C posted by Chet on September 04, 2001 at 16:37:18:

The belt pulley and the PTO run from the same shaft. There is a gear on that shaft that runs the PTO shaft and another gear that runs the belt pulley. If the belt pulley runs and the PTO does not, the something is wrong in the gear on the PTO shaft that meshes on the common drive shaft for the pulley and PTO. If the PTO shaft has slid out, the likely the gears are no longer in mesh. It's not exactly clear to me from looking at the parts diagram as to how all this is held together. It does look to me though that you are going to have to remove the PTO/pulley assembly from the transmission to fix the problem.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: PTO on Super-C Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]