Re: M- Main Bearing Questions

Posted by Ralph on September 02, 2001 at 09:11:30 from (64.20.91.81):

In Reply to: M- Main Bearing Questions posted by Joe on September 01, 2001 at 20:10:33:

All: Just a comment about plastic guage while engine is in the tractor. I simlpy take my smallest hyd jack and a wood 1X2 and apply UPWARD pressure on the crank on the NEXT journal closest to the flywheel. It only takes maybe 100 pound of pressure to eliminate any sag in the crankshaft. Takeing the engine out and placing upside down is extra work for only a slight more accuracy. I also apply a coat of light grease to the bearings for first start up so they'er not dry. ralph

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M- Main Bearing Questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]