Re: Carb float sinks

Posted by FC on August 31, 2001 at 05:25:58 from (208.14.16.15):

In Reply to: Carb float sinks posted by Jim on August 31, 2001 at 03:56:34:

I cleaned up the one on my C and resoldered carefully. It worked, but use care to remove gas from float first, and do not add any more solder than absolutely necessary. I actually made a bigger hole where bad spot was then removed gas and soldered hole shut. I couldn't find a float for my Carter or I would have replaced. Good Luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Carb float sinks Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]