Re: Re: Re: YO, RED

Posted by The Red With Picture on August 28, 2001 at 15:16:23 from (12.84.245.227):

In Reply to: Re: Re: YO, RED posted by LOU on August 28, 2001 at 10:40:43:

Lou the narrow side is 1/4". The wider side is 1/2". It is about 5/8" long where it is surface ground. If you carefully look at those shifter forks, those indentations are actually rounded indentations for the fork to push the 3 individual forks forward or back for the corresponding gear. If you are facing the forks from the rear of the tractor, the left fork is 4/5. The center is 2/3, and the right fork is R/1. I hope this helps!!

• Farmall H Shifter Lever Lower End

Follow Ups:

• Re: Re: Re: Re: YO, RED LOU 18:50:22 08/28/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: YO, RED Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]