Re: How Do I take an IH-300 out of Storage

Posted by Zonie on August 23, 2001 at 20:09:33 from (64.12.101.156):

In Reply to: How Do I take an IH-300 out of Storage posted by Ken Tajchman on August 23, 2001 at 11:45:08:

As far as working on these old tractors goes you won't need too many specialized tools. You can fix about anything on them with a pair of pliers a screwdriver and a crescent wrench. Some of the newfangled tools do come in handy tho! Tools like a socket set, hydraulic jack, box end wernches.
I'm in the process of rebuilding my Farmall H (older brother to the 300) and the only specialized tool I've needed so far was a sleeve puller which I built.
These tractors were built so just about anyone could work on them with just a little mechanical ability. There's nothing to be afraid of!
I wish I could find a farmall 300 myself, if I did I'd be in trouble 'cause I couldn't pay for it anyway!
just my 2 cents worth!
Zonie

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How Do I take an IH-300 out of Storage Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]