|
Farmall & IHC Tractors Discussion Board |
Re: RE: Parts for a Farmall H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by wh on August 21, 2001 at 05:47:09 from (216.180.38.52):
In Reply to: RE: Parts for a Farmall H posted by Slappy on August 21, 2001 at 03:32:53:
I needed a choke rod for the last h I restored. Wound up making it. If you have any mechanical ability you should be able to yourself. I used a 3/16 rod that came from a flower stand that I got out of the trash heap at a local cemetary. Just start at the carb and work your way back where you want the choke to go. You will need to heat it to shape it but a propane torch with time will heat it. Just don't get in a hurry. Let it turn red hot where you want to bend it. you might even used a large size wire to make a pattern to work from. Email if you need help. WADE
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
