Re: Re: Farmall Cub brake drums

Posted by Dave Powers on August 19, 2001 at 06:11:51 from (209.240.220.151):

In Reply to: Re: Farmall Cub brake drums posted by Red Raider on August 18, 2001 at 18:16:04:

Thanks for the info. I thought it should be a snug fit. In my case however, I believe the majority of the wear has taken place on the inside of the drum. The key there is nearly gone, but the one on the shaft seems to be in good condition. I'm not sure, but I would think the cast drum would be softer than the shaft and therefore allow for more wear. What do you think? Now that you have assured me it is suposed to be a snug fit I guess I'll need to find a couple of replacement drums. Any sugestions? Does anyone what the diameter of the shaft should be? Thanks again.

Dave

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Farmall Cub brake drums Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]