Need help with Farmall M

Posted by Todd on August 16, 2001 at 18:14:48 from (152.163.204.59):

I have a 41 M and this is my first farmall. After tearing down the engine I found out that 2 sleeves were busted. I'm trying to keep costs down, so to make a long story short, I know that the original bore is 3 7/8 and super M's are 4 1/8. As best as I can tell the pistons ar an even 4". Is this right? Did they make a 4" sleeve bore? If so who has some good used sleeves of this type. If you have them, let me know how much.

Follow Ups:

• Re: Need help with Farmall M jiM 03:32:47 08/17/01 (0)
• Re: Need help with Farmall M the old timer again, with a different link 22:52:11 08/16/01 (0)
• Re: Need help with Farmall M old timer's advice 22:35:01 08/16/01 (0)
• Re: Need help with Farmall M Zonie 22:24:51 08/16/01 (0)
• Re: Need help with Farmall M Dan 21:20:46 08/16/01 (0)
• Re: Need help with Farmall M Will@ont.ca 20:52:32 08/16/01 (0)
• Re: Need help with Farmall M Haas 18:28:45 08/16/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Need help with Farmall M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]