Re: Re: Farmall M with hand clutch

Posted by John Carpenter on August 01, 2001 at 21:58:08 from (12.27.55.243):

In Reply to: Re: Farmall M with hand clutch posted by Bill Smith on August 01, 2001 at 21:13:34:

The purpose of the hand clutch was to give the effect of live pto on farmalls. It did this by disengaging the rear wheels without disengaging the main engine clutch. This was accomplished by putting another brake shaft in the tractor that would disengage the left wheel. That allowed the differential to turn, but power was not transmitted to the wheel because of the hand clutch. You could not use the hand clutch to shift gears, it only worked for live pto. The kit was made by M&W.

John C

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Farmall M with hand clutch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]