450D intake manifold

Posted by Jon on July 28, 2001 at 14:46:29 from (209.172.217.170):

While taking apart and cleaning up the intake manifold off of my 450D today I noticed that the front endcover has no place for the wire from the coil or the wire from the ing switch like what is shown in my 400D parts book(I assume the 400D and 450D manifolds are the same?). The front and back covers are the exact same. When I took them off, the back cover was full of motoroil, should it have oil in it? The front cover does contain some type of a switch, but there is no way for any wires to be hooked up to it. Anyone know why its like this? Thanks.

Follow Ups:

• Re: 450D intake manifold haas 16:38:53 07/28/01 (1)
  • Re: Re: 450D intake manifold Jon 17:20:59 07/28/01 (0)

Post A Followup Name: E-Mail: Subject: Re: 450D intake manifold Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]