Re: 656 Farmall carburetor

Posted by Jeff on July 26, 2001 at 05:54:54 from (216.93.56.169):

In Reply to: 656 Farmall carburetor posted by Rick Lees on July 25, 2001 at 19:51:04:

Rick, it sounds to me like you have a problem with your carburetor float. The float is either too heavy-filled with liquid, or is sticking and not pushing up on the needle valve, shutting off the gas into the carburetor after the reservoir is full. Make sure the float isn't stiff at it's pivot point. If the float is OK, then check the needle valve and the seat. Check for debris, make sure they are clean, and check their condition. Look for pitting or gouges on both the valve and the seat as it's a good bet one of them isn't sealing properly.

Follow Ups:

• Re: Re: 656 Farmall carburetor Rick Lees 15:50:08 07/26/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 656 Farmall carburetor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]