Re: Re: Farmall inter axle bearing

Posted by John In Iowa on July 23, 2001 at 06:51:04 from (199.108.164.36):

In Reply to: Re: Farmall inter axle bearing posted by the tractor vet on July 22, 2001 at 22:14:10:

Thanks; I plan on using a motor jack to hold the axle housing and I have a good set of stands to set the tractor on. Matter of fact I have the tractor sitting on them now for the painting, but I�m going to put 3 of the tires on before I take on this job. When I was cleaning the tractor, I had to replace the gasket on the other side and it looks like it�s been replace before because it had silicone gasket sealer on the gasket. I was able to get � of an inch gap and was able to clean all of the old gasket out. I cut the new gasket on the top quarter and was able to install.

John In Iowa

Follow Ups:

• Re: Re: Re: Farmall inter axle bearing the tractor vet 22:43:18 07/23/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Farmall inter axle bearing Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]