Farmall M front Bearings

Posted by Andy on July 09, 2001 at 05:51:03 from (63.127.22.241):

I have an "M" with a Trike front and the "Bolster Axial" on one side had a shot seal. I was able to hammer off the dust shield on the very inside..however I'm not sure how the seal comes off. The other side has a different seal so I assume they are replaceable..The side that's damaged had a more "Traditional seal Ring" (with a spring etc.) while the good side appears to have a metal ring (that the inside wheel bearing sits against) followed by three rubber rib rings which lead into the dust shield...

Anyone ever take on of these apart? Where can I get parts for it? Appreciate any help/comments..

Follow Ups:

• Re: Farmall M front Bearings The Red 07:15:23 07/09/01 (1)
  • Re: Re: Farmall M front Bearings Jon with an M 07:42:36 07/09/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Farmall M front Bearings Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]