Re: Any Tips for removing and installing A manifold

Posted by Brett on July 07, 2001 at 09:42:03 from (63.239.102.51):

In Reply to: Any Tips for removing and installing A manifold posted by Otis on July 06, 2001 at 17:14:36:

Otis:

I just replaced the manifold on my H this past weekend. All went well. I didn't need an impact wrench or anything. I used a Black & Decker polisher called a "mouse" to clean up the surface after removal. Put on the new gaskets and made one to fit the carb connect. Bolted her on and torqued the nuts to 50 lbs. Now she purrs like a kitten. The manifold is now the cleanest and best looking part on the whole tractor. :-)

Have fun and good luck!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Any Tips for removing and installing A manifold Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]