Re: Any Tips for removing and installing A manifold

Posted by Farmer Bob on July 06, 2001 at 22:50:56 from (208.49.9.201):

In Reply to: Any Tips for removing and installing A manifold posted by Otis on July 06, 2001 at 17:14:36:

Otis, You may end up using an impact wrench on those manifold nuts. Unless it was off recently and put back on with anti-seize on the threads, you can expect some of the studbolts to turn out of the head. I'd have new studs on hand just in case. Worse thing that can happen is you twist off a bolt in the head. Good luck. Hope the Kroil has helped. I think it is great stuff.//FB

Follow Ups:

• Re: Re: Any Tips for removing and installing A manifold Otis 21:54:00 07/08/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Any Tips for removing and installing A manifold Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]