|
Farmall & IHC Tractors Discussion Board |
Old Rusty H. PROJECT HALTED
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by The Red on June 30, 2001 at 14:43:34 from (12.75.196.73):
Well Farmallers I had a setback with Old Rusty H. After getting #1 piston/sleeve assembly out, I noticed a horizontal crack in the cylinder wall about 4 inches down. I filled the water jacket with water and it is leaking. Coolant had to be getting into the oil when this tractor last ran. I have an email into another person who has a rough looking but running H for sale near my farm. If we make a deal, then the project will resume. I'll take parts off of Old Rusty and complete the other H. I'll have my buddy Slo Mo transport Old Rusty to the farm where I can help you all with some parts. I will take a picture late Sunday morning, when the sun angle is just right, so you can see the sizable crack.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
