Re: still working on h

Posted by The Red on June 23, 2001 at 04:09:04 from (12.75.196.221):

In Reply to: still working on h posted by randy h on June 22, 2001 at 19:35:31:

Randy I dug up your threads in the archives to refresh my memory. These things can get frustrating at times.

Did the H run before the rebuild?
Did you remove the distributor during the rebuild?

Check your point gap for .020. If there is any wiggle in the rotor shaft, set them at .018. I am wondering if those points are not always closing.

Follow Ups:

• Re: Re: still working on h randy h 19:31:23 06/24/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: still working on h Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]