Re: locked up engine

Posted by Bill C on June 22, 2001 at 23:38:57 from (64.24.229.34):

In Reply to: locked up engine posted by jim on June 21, 2001 at 14:43:03:

Check the clutch.A friend of mine was given a 1 ton Chevy truck that the motor was "locked up" in it.The rest of the truck was junk,but the motor was a 454c.i. big block so he decided to pull it out and scrap the rest.After he dropped the tranny,he noticed the clutch fingers were bent into the holes in the flywheel and hitting a casting line on the back of the block,thus,not allowing the motor to turn over.Took the clutch off,and the engine fired right up!!Don't know if this helps or not,hope so.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: locked up engine Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]