Farmall & IHC Tractors Discussion Board |
Re: Farmall 300 vs. Farmall M
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john d on June 20, 2001 at 20:54:54 from (64.12.102.174):
In Reply to: Farmall 300 vs. Farmall M posted by Ralph on June 20, 2001 at 19:48:20:
If you're talking about putting them in the field with tillage equipment, the M will work the 300 into the dirt. While the 300 is about the same physical size, and is newer, the M has a larger engine, probably weighs more, and may have larger tires. The gear ratios for 2nd, 3rd, and 4th gears are closer on the M than the 300, giving the M somewhat of an advantage on finding the optimum tillage speed. If the 300 has a good TA, that will help, but not enough. By this time, the 300 and the M have likely been overhauled at least once or twice, and have probably received some engine parts that increased the power somewhat. Here again, the M has the advantage, as the overbore kits for the M increased the displacement to 264 cid, a bigger increase than the 300 got from its kit. The 300 Utility came from the factory with the rpms set higher than the row crop units. Within weeks, lots of farmers had turned the row crop tractors up to the same rpm limit as the utility models (about 2100 or so) and got some hp increase. Even that isn't going to put the 300 ahead of the old M, however, as a large percentage of those monsters have had the governor opened up to let them run 2000 rpms or more. (I've got one that's been faster than that since 1964, and I can't see that it's hurt it much!) Factory hp ratings were very close, but some of the old M tractors now push out close to 50 hp, a few even more! The 300 will have better hydraulics, and the live pto found on most models makes it more versatile. On a pto job, a good 300 can come close to holding its own against the M, but by the end of the day, it will have worked harder!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: What's in Your Tractor's Toolbox? - by Staff. This recent discussion on the Tractor Talk discussion board here at the on-line magazine drew so much response and proved to be so interesting that we wanted to share it with you here. The names of the people participating in the discussion have been left out to "protect the innocent" (to quote a once-popular television series).
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|