Re: Re: Bleeder valve on Lift-All breather cap?

Posted by rich on June 14, 2001 at 15:11:25 from (206.9.239.130):

In Reply to: Re: Bleeder valve on Lift-All breather cap? posted by PaulH on June 13, 2001 at 14:00:40:

I had the same problem with the Super M with live hyd. I had another reservoir made to fit in the place of the one gallon gas tank for distillate operation I put a fill plug on the extra tank and a vent ( like the 400 has )on the extra tank and ran a hose from the fill cap of the lift all to the bottom of the extra tank. that solved the problem and also i had another 2 gallons of oil for my loader or capacity for oil to settle before it exits the vent. only problem is i have to take the hood off to add oil but unless a hose blows there is very little need. no more hydraulic blowby.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Bleeder valve on Lift-All breather cap? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]