Re: torque specs for IH656 Hydro?

Posted by JH on May 10, 2001 at 09:25:44 from (198.26.130.36):

In Reply to: torque specs for IH656 Hydro? posted by GSS on May 07, 2001 at 12:31:53:

From my service manual on this tractor, #GSS-1397, I find no torque values given for those applications. However, in that same manual there is a Standard Torque Data chart for nuts and bolts. The L shape cover you speak of, on my tractor is installed with IH type 2 bolt, which is a SAE grade 5 bolt. It has a 9/16 hex head and 3/8" shank at 16 tpi. Torque those bolts at 33 to 37 ft lbs. Same with your Hydro trans filter cover, locate on the right side of the housing just below the brake pedals. For the drawbar support housing, they are also IH type 2 bolts, or a SAE grade 5 bolt, with a 15/16 hex head and 5/8" shank at 11 tpi. Those torque up at 160 min-180 max ft lbs. Type 1 IH bolts are SAE grade 1 or 2. Type 2 IH bolts have 3 lines on the head and are SAE grade 5. Type 3 IH bolts have 4 radial lines on the bolt head and are SAE grade 6. Type 4 IH bolts have 6 radial lines on the bolt head and are SAE grade 8. Hope this helps. Good luck.

Follow Ups:

• Re: Re: torque specs for IH656 Hydro? GS 12:18:31 05/10/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: torque specs for IH656 Hydro? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]