Re: H Clutch

Posted by Mike Soldan on April 21, 2001 at 18:21:11 from (216.46.140.186):

In Reply to: H Clutch posted by davem on April 21, 2001 at 17:56:11:

Dave, when you replaced the clutch did you adjust the clutch rod? I-h specifies 1 1\8 " of free play on the clutch pedal and I was told recently on this forum that you need 3\16" between the clutch fingers and the release bearing. I used to just eye the fingers up and set them all the same distance. If you've done those things you need to look elsewhere. Good Luck form Mike Soldan In Exeter Ontario

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H Clutch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]