Re: need help bad, no fire to plugs on farmall cub 6 volt

Posted by George Willer on April 09, 2001 at 10:46:24 from (64.254.131.130):

In Reply to: need help bad, no fire to plugs on farmall cub 6 volt posted by georgia boy on April 09, 2001 at 07:45:06:

From your description, you must have a mag that was converted to work as a distributor. If I understood correctly, the coil was firing...the spark just can't find the plugs. This should work...Bring #1 piston to TDC on the compression stroke. Mark the location of #1 plug wire on the outside of the mag and remove the cap. Now remove the rotor and replace it so it points to the mark you just made. If the impulse is still working, and it was in time before, it should be in time and run. A true distributor doesn't have the geared rotor or impulse.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: need help bad, no fire to plugs on farmall cub 6 volt Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]