Farmall & IHC Tractors Discussion Board |
Re: Farmall H high gear out
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by PRW on April 06, 2001 at 18:52:02 from (216.138.27.91):
In Reply to: Farmall H high gear out posted by LB on April 06, 2001 at 02:39:59:
I just had this problem fixed on my 1951 H. It could be one of several things or more likely a combination of these. Bent shift forks is one, a worn high gear, which is more than likely caused from trying to shift while the tractor was moving.Another common problen is the gear shifter poppet spring will break and not hold the poppet in place which will allow the transmission to come out of gear. Another is that the main shaft will be worn and need replacing or maybe the pilot bearings are worn out and need replacing. If it won't stay in gear at all I would guess that you are going to have to replace that gear. If your luck is like mine it will be several if not all of the above.
Follow Ups:
Home
| Forums
Today's Featured Article -
A Farmall Story - by Ed Meadors. The year was 1978. Our young family had recently moved to rural Chesapeake, Virginia to a plot of land which would finally allow us to realize our dreams of a huge garden, critters and more lawn and pasture than we would ever use! We needed a TRACTOR; not a riding mower or tractor wannabe, but a real TRACTOR. The answer to our needs materialized in the form of a '44 Farmall A, complete with cultivators, discs, single plow, a 5ft.Woods belly mower and one, mounted spare 9.00x24 rear wheel.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|