656 hydrostatic

Posted by Brad on March 30, 2001 at 09:04:13 from (206.47.98.151):

Our hydro is acting up in our 656. The drive pressure starts jumping at around 4000 psi. It will pull itself forward and reverse in low range but has no draw bar pulling ability past that point. In high range It just vibrates the wheels and sounds terrible. THis occurs in both forward and reverse at any RPM. We have changed oil, servo valve, and foot&inch valve.

Any insight to our problem would be greatly appreciated.

thank you,
Brad

Follow Ups:

• Re: 656 hydrostatic Ace Schrunk 10:11:16 03/30/01 (2)
  • Re: Re: 656 hydrostatic Alvin 11:33:01 03/31/01 (1)
    • Re: Re: Re: 656 hydrostatic brad 15:09:29 03/31/01 (0)

Post A Followup Name: E-Mail: Subject: Re: 656 hydrostatic Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]