Re: It wasn't a rod knocking, but listen to what I found. M

Posted by Chicken George on March 22, 2001 at 06:14:32 from (207.75.138.57):

In Reply to: It wasn't a rod knocking, but listen to what I found. M posted by jim on March 21, 2001 at 17:21:37:

Jim,
If the other pistons and walls look good You can get by with 1 piston/rings, and a sleeve if you need it. BUT if you are going to WORK the tractor you should replace at least the rings, if the sleeves look good, if not, a sleeve kit,pistons
w/rings/pins is in order.Also a valve grind should be done also while the head is off. so, you decide what you want to do, Luck, Geo

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: It wasn't a rod knocking, but listen to what I found. M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]