Super AV Steering Pipe Plug Won't Stay Tight

Posted by Phil on March 05, 2001 at 17:53:36 from (206.196.97.70):

I think I got lucky with my Super AV steering problem. It used to take about half a turn before the tires would turn. I saw on previous post that the steering yoke sometimes gets loose. Well, I was able to tighten it and got most of the slop out of the steering. This helped but, I still had the road crazy front end. I also remembered another post where you could put a large washer to hold the front bearing tighter against the worm gear. With the washer, the steering is almost perfect. Before I added the washer, the large pipe plug on the end was screwed all the way in until the treads stopped. But now with the washer, I am having trouble keeping the pipe plug tight. What can be used to hold the pipe plug tight...thread locktite? Pipe thread compound, pipe tape. Has anyone else had this problem. If I really crank on the pipe plug, you can not turn the steering wheel.

Follow Ups:

• Re: Super AV Steering Pipe Plug Won't Stay Tight Haas 18:57:52 03/05/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Super AV Steering Pipe Plug Won't Stay Tight Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]