Re: Disc Brakes on 1940 M ???????

Posted by Haas on February 20, 2001 at 17:21:50 from (129.37.117.187):

In Reply to: Disc Brakes on 1940 M ??????? posted by Jason on February 20, 2001 at 12:21:52:

Wardner is correct. These brakes were an option offered by IH. They are shown in the IH parts book. You can even still get the disks for them from IH. Although expensive. I have a 1947 MD that has them too. I found out what they were by asking on this forum. It makes your tractor unique and somewhat rare as the Lambert brakes are not very common. I had to reline mine. I did that instead of paying $80 per disk to get new disks from IH. The relining was done by my local clutch/brake shop. They work very well now and do a good job of stopping the tractor. They are easy to take apart.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Disc Brakes on 1940 M ??????? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]