Re: Re: Heads

Posted by jakee on February 18, 2001 at 19:24:56 from (152.163.201.179):

In Reply to: Re: Heads posted by Red Raider on February 18, 2001 at 16:07:31:

look directly into the intake port,s and look for a little bump that runs from top to bottom. i think the 8574 has those ,if it does it makes it a late 1947 and up head like the good 8060 head,they were trying to give the fuel a little direction wen it came to the back wall of the port. and i all-so think that head was from a w-6 ?. had one on a m and cut it .180 to bring the compresion up and it helped, i think the runners and combostion area hold the same cc,s as a 8060.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Heads Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]