Re: 560 wide front end

Posted by Bob on February 17, 2001 at 19:43:26 from (216.248.74.169):

In Reply to: 560 wide front end posted by Daniel on February 17, 2001 at 17:25:51:

Daniel: Everything will fit except the rear saddle which is higher than what will fit on the M. The reason is that the 560 has extensions about an inch or maybe a little longer where the axle bracket attaches to the front bolster and the M & 400's are almost flat. If it's a Schwartz wide front end the rear saddles are readily available for about $60. You will need hubs from a 560 to fit it also as the bearing sizes are different. I paid $450 for mine but had to replace the king pin bushings and front swivel bushing to get it as tight as I like it.

Follow Ups:

• Re: Re: 560 wide front end Daniel 20:33:35 02/17/01 (0)
• Re: Re: 560 wide front end Daniel 20:31:32 02/17/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 560 wide front end Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]