Re: Re: International U6

Posted by Tom Harrower on February 13, 2001 at 04:17:07 from (216.126.180.68):

In Reply to: Re: International U6 posted by sammy the RED on February 12, 2001 at 16:45:17:

Hi Chris, I have a 1942 IHC I-6 tractor, on the right side of the engine block there is a casting # 6722-D6. As the others said , this engine was used in several different tractors. From the factory in my I-6, the engine is 247.6 cubic inches( most sources just say 248), and is rated at 25 drawbar horsepower, 32.4 horsepower at the belt pulley. Overhaul parts for this engine are available from many different sources. From what I have learned so far, this is a strong and dependable engine when cared for....Tom

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: International U6 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]