Re: Dull Aluminum

Posted by kimk on February 06, 2001 at 16:02:18 from (209.198.81.109):

In Reply to: Dull Aluminum posted by Daniel M. on February 05, 2001 at 21:12:37:

I think the key word in your post is "cast". Cast aluminum won't "polish" as such but it will "clean up" . I would use some tripoli compound on a muslin cloth wheel. Easiest to use on a bench grinder if the parts are not to big , but could be used in a hand drill. De-grease before buffing. Hey nothing wrong w/ being a bit lazy, if hard work was the key to riches , bricklayers would be the richest guys on earth. Don't work hard -- work smart.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Dull Aluminum Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]