Farmall & IHC Tractors Discussion Board |
Re: How to set the clutch and TA on 460
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Red Button on February 01, 2001 at 10:15:53 from (207.232.79.81):
In Reply to: How to set the clutch and TA on 460 posted by Mike on January 31, 2001 at 13:48:10:
There is a step by step way 1 pull Ta lever back and lock in TA 2 push foot peddle down till it stops with through out BRG at clutch fingers that is free peddle should have 3/4" between peddle and deck adjust link to get 3/4" 3 release TA Lever 4 hold foot peddle at the free travel and move TA lever back till it stops at it's free travel the pin in the short link should be tight if not adjust till pin is tight 5 with foot peddle back at deck and TA lever forward the pin in the long link on TA lever should be just lose. repet to double check 6 drive tractor to see how it works if it hangs in gear shorten short link between the 2 cross shafts 1/2 Round good lock
Follow Ups:
Home
| Forums
Today's Featured Article -
Show Coverage: Godfrey, Illinois Country Days - by Cindy Ladage. Except for last fourth of July's Old Gold show in Springfield, Illinois, I don't remember when it was so hot. Nevertheless, the heat didn't keep vendors and visitors alike from enjoying the third annual Country Day's Event. Jane Elliott said the event was originally a one man show. "Barry Seiler, owner of Country Town Farm Supply store used to invite people up to the Johne Deere store. He would give hats and a free meal for everyone that brings a tractor." Elliott said while this
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|