(800) 853-2651
SHOP NOW

Deere 820 Manhm. rear pto lever

G

grapevine

New User
Hello my name is Rob and this is my first post.
My tractor’s rear pto leaver will not disengage but my two stage clutch will. I"m thinking the pin is sheered on the leaver shaft part 2 or part 4 is broken.(ref pix) The lever's position is too far forward and stops at the 11 o'clock position on the swing back to disengage. My question is should this job be left to the professionals or can someone with basic skills take that plate off the top to get area of repair? Any comment will be appreciated.
My rear PTO lever
 
Hi Rob...From what you posted I am thinking that your PTO will stop with the clutch pedal fully depressed,but shifting the lever makes no change in the engagement. If this is the case I would think your diagnosis is correct. Now for the rest of the story,to repair this requires the rockshaft housing to be lifted off. This is heavy and will require a crane or hoist. The shift linkage repair is easy.....probably a roll pin,cleaning the gasket surfaces is straight forward and reinstalling the rockshaft cover is easy EXCEPT FOR getting the follower from the load sense arm up into the proper position in the hitch linkage. Iam not trying to scare you but that part is tricky and I am not sure what skills or resources you have (besides the internet).If you have more questions myself and several others here will try to help, Bob
 
Thanks alot Bob. My bother is a mechanic and is trained on rebuilding Caterpillars and he can be a valuable resource. Most likely I will be doing the work my self. Maybe you have a brother like mine. LOL Your tip about follower is priceless and I really appreciate your post. I’ll ask my brother what that means. I never thought about the lift either. I guess that’s why I sell stuff for a living. Thanks again. rob
 
You must log in or register to reply here.

Similar threads

P
update on 544 hydro PTO
Replies
3
Views
338
buickanddeere
B
R
John Deere 4620 pto removal
2
Replies
22
Views
676
Reprob
R
I
IH 444 PTO lever
Replies
3
Views
244
JimB2
J
B
550 front PTO lever
Replies
7
Views
1K
BrotherJoe
B
R
Farmall 504 PTO always on
Replies
13
Views
408
Janicholson
Janicholson
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top